Pages

Tuesday, May 28, 2013

Part 2: Project Ramblings from MrsMiniK


So, I have another project to share with you that I recently completed. After dabbling with the two Super Dungeon Explore promo models I decided to try my hand at one of the small expansion boxes: Rock Top Gang (Jay went for the Denizens). Don't worry non SDE fans, I'll be featuring something else next time...I have some Corsairs and Wood Elves in the pipeline. ;)

The Rock Top models themselves are nice to work with, although some of the mould lines are really annoying to remove, and I got Jay to help with some of that. These models also require you to fill in the gaps in the bases, so I did that with a bit of green stuff - it didn't take too long, but it does add on a bit of extra time before you can spray them with a base coat.

In the meantime I had to come up with a colour scheme. I knew right away I didn't want the turtles to be overly garish or vibrant and so I decided to go with a more muted, earthy-ish vibe, which I think suits the lil turtle dudes what with all their rockbits and nubbins.

I do mix my paints alot so I can't tell you the exact ratios...I just go with the flow, but here are the colour palettes I used (Foundry paints unless otherwise stated):

Crusher:
Skin
- Royal Purple                                  
- Quagmire                                  
- Shadow Pink                                  

Shell & Nails
- Quagmire                                  
- Royal Purple                                  
- GW Wash mix of Baal Red & Asuremen Blue                     

Eyes (all turtles)
- Phlegm Green                                  
- GW Black           

Bellies (all turtles)
- Phlegm Green                                  
- GW Wash Azure Blue          

Rollers:
Skin
- Storm Blue                                  
- Deep Blue                                  

Shells
- Quagmire                                  
- Slate Grey                                  
- Storm Blue                                  
- GW Wash Azure Blue          

Slowpokes & tokens:
Skin
- Storm Green                                  

Shells
- Quagmire                                  
- Storm Green                                  
- GW wash Biel-tan           
   
So that's enough chit chat, here are the pics. Enjoy :)









     

Monday, May 20, 2013

Dystopian Wars - Russian Colaition Kostroma Class Battle Carrier

Okay it has been a while, there is plenty going on in the studio I will endeavour to share more of it here!

I have a few individual Dystopian Wars models in the pipeline because I wanted to get a look at some of the larger pieces and have some fun with them. I was immediately excited and daunted upon opening the parcel containing the first of these. These 'massive' category vessels are... massive! For a sensible price point you get a serious chunk of finely cast resin. The Russian carrier, which I started with, was in fact a blister pack full of goodies with flyer tokens, Icebergs and cards.

Two massive carriers begging for paint. Big thanks to the Prussian Battleship and Forest Green Light for standing in as comparison.
With the inspiration of the Russians and the White army of the Dystopian Wars Universe my mind wandered to the icy waters of the Arctic. I am always a huge sucker for themes, whether through; colour schemes, conversions, or basing. Together with the idea I wanted to try for a sturdier magnetized base my course ahead was set.


I traced the outline of the vessel and created a two layered plasti-card base. Aside from a sturdy structural integrity this provided the depth for 2mm magnets to be slotted into the top layer, it also gave some possible depth to the waves to be sculpted around the hull. The ice bergs are roughly cut plasti-card mostly stacked up in two layers. I was careful to attach these with the inclusion of some green stuff to give them some movement in the waves.


Green stuff was built up in stages, simply adding height to previous spots or filling in and blending gaps. As I built these stages up I was mindful of the following; the waves rolling off the side of the hull, the large bow wave, and the choppy engine wake at the stern,

The base was finishing lastly with a thin self adhesive cork bottom, which is rather luxurious for gaming.

The primary colour is the Arctic Grey palette from foundry, I envisaged an off white hull with some grubbier colouration and weathering with dark decking and even darker industrial structures. I was initially going to paint the obvious Coalition bear logo on the carrier deck, but after goggling some Russian inspiration I settled  on the bear and eagle of Russian Standard Vodka (Itallics require a thick Russian accent), this seemed fitting for a coalition aircraft carrier and is a classy logo. Perhaps not a piece for the purists out there. The flyers I kept purposely clean and simple, because their form can easily be lost on the table. Enjoy!

PS: The next piece is to be a Britannia Eagle Class War Rotor. I am dying to apply the colour scheme I have in mind but I am awaiting delivery of some vital and awesome "Omni-Stand" flying bases from Corsec Engineering.


Monday, May 6, 2013

ZOMBICIDE: Re-basing



Zombicide! It's Popularity keeps on increasing. With over three million funding during two Kickstarter projects the number of zombies produced will, this September, reach epidemic proportions. This is in part due to the fantastically generous Coolminiornot Kickstarter projects, they haven't ceased to provide a bucket full of models for anyone purchasing their game publications through Kickstarter. Anyone simply investing in both seasons of Zombicide could probably swim in a vault filled with zombie miniatures Scrooge McDuck style (though I found it was not as fun as it looked).

But I am here to talk about basing, or rather re-basing. As an old time wargamer and painter I am unshakably aware of the impact decent basing can have on a model. This is no less true for miniature boardgames, the atmosphere and investment in such a game is highly dependant on the pieces you are pushing around. You can weight up the urgency of shooting a grey lump of plastic to shooting a crazed rotten zombie dripping with blood, his lifeless yet fierce eyes bearing down on you, hungry for any taste of your flesh. To take it one step further, the imminent danger posed by a crazed rotten zombie stood on grey plastic is perhaps less than one stood on the same patch of tarmac as your alter ego survivor. Obviously there is only subtle shades of realism involved, but the more visual indicators the greater the experience must be, consciously or otherwise.

Besides, some of the bases are utterly wobbly and just a pain to keep upright. From the get go I coated Zombicide bases in fine sand to provide a subtle texture that was painted in greys for an urban look. But had always considered fully re-basing the models. Unfortunately this is hampered, as the model and base for these figures is all one piece. Removing any one of these models is difficult and potentially disastrous re-basing any quantity of these models was a terrifying prospect in terms of time and modelling. So I wanted to base the models to look consistent and professional while maintaining the structural integrity of the models.

But don't fret, the answer is at hand!

Strangely enough the answer also appears to be produced by Coolminiornot, or at least produced in conjunction with Coolmini for Dark Age. So step forward ye delightful Dark Age 30mm Deep Bases. While these may be similar in overall design to Warmachine (they are in fact subtitled as such) and many other rounded 30 mm bases, they differ enough to be absolutely perfect for Zombicide.


The Zombicide models do not fit inside the top of a Warmachine base as their base is larger than the indent, even if you were to trim it the Zombicide base it would protrude noticeably. However the entire disc of a Zombicide model base fits inside the indent of these deep bases with unerring accuracy. \o/

The fit is so ideal the models can almost snap-fit into place. With a touch of glue (Polycement was used in this instance, rigid plastic or super glue would likely also do the job) an entire set of Zombicide can be based in minutes.




While the bases can be easily glued I wanted to ensure that any of the troublesome and wobbly bases were completed levelled. With the help of a few Bullclips each models bases could be viced in place while the glue would weld securely; I just left them overnight.


I ensured that the Zombicide bases were textured and painted (including the edging) before attaching them. This kept the rounded bases pristine as new avoiding any undercoating, paint, or basing materials. The level and flat stability these bases provide is a joy on the boardgame. Although, I have yet to test if a full Zombie swarm might be oversized for the board since packs of zombies form on certain street sections. I also need to test the larger 40mm Deep Base, the Abomination look fantastic on these! Photos of them coming soon.



So here we have my latest almost finished painted Survivors (last minute details & shading needed) including shiny bases! Hopefully this will help peeps out there who were considering re-basing but wasn't sure how to go about it. These bases will also feature as a option on my price list for any future Zombicide commissions.